Denon AVR-1611 - Playing an Ipod

21
ENGLISH
Advanced versionSimple version InformationBasic version
Playing an iPod
®
You can play back both video, photo and audio.
Listening to music on an iPod
®
DENON Control dock for iPod usable on this unit
• ASD-1R/ASD-11R/ASD-3N/ASD-3W/ASD-51N/ASD-51W
1
Prepare for playback.
q Connect the DENON control dock for iPod to this unit
(vpage18 “Connecting a control dock for iPod”).
w Set the iPod
®
in the DENON control dock for iPod.
2
Press POWER ON to turn on power to the unit.
3
Press DOCK to switch the input source to “DOCK”.
• If “Browse mode” is selected in step 4, the following screen is
displayed on a TV screen, depending on the connected control
dock for iPod.
Artists
Albums
Songs
Genres
Composers
Playlists
Music
[ 1/6 ]
GWhen using an ASD-1RH GWhen using an ASD-11RH
Videos
Music
iPod
[ 1/2 ]
iPod
Music
Video
Track SelectTrack SelectTrack Select
Up/Down Select
GWhen using an ASD-3N, ASD-3W, ASD-51N and ASD-51WH
• In “Browse mode”, the iPod display is as
shown at right.
NOTE
If the connections screen is not displayed,
the iPod may not be properly connected.
Reconnect it.
OK to disconnect.
4
Press SEARCH and hold it down for 2 seconds or
more to select the display mode.
• There are two modes for displaying the contents recorded on the
iPod.
Browse mode
Display iPod information on the TV screen.
• English letters, numbers and certain symbols are displayed.
Incompatible characters are displayed as “.” (period).
Remote mode
Display iPod information on the iPod screen.
• “Remote iPod” or “Dock Remote” is displayed on the display
of this unit.
Display mode
Browse mode Remote mode
Playable
files
Music file
P P
Photo file
P
z2
Video file
P
z1
P
z2
Active
buttons
Remote
control unit
(This unit)
P P
iPod
®
P
z1 When using an ASD-11R, ASD-3N, ASD-
3W, ASD-51N or ASD-51W DENON
control dock for iPod.
z2 Video may not be output, depending on
the combination of ASD-1R, ASD-11R,
ASD-3N, ASD-3W, ASD-51N or ASD-
51W DENON control dock for iPod and
iPod.
5
Use ui to select the item, then
press ENTER or p to select the
le to be played.
6
Press ENTER, p or 1.
Playback starts.
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu “iPod” (vpage54). Press uio p to
return to the original screen.
• To play back compressed audio with extended bass or treble
reproduction, we recommend playback in RESTORER mode
(vpage48). The default setting is “Mode 3”.
• In Browse mode, press
STATUS during
playback to check the title name, artist
name, and album name.
NOTE
• Press POWER OFF and set this unit’s power
to the standby mode before disconnecting
the iPod. Also switch the input source to
“DOCK” before disconnecting the iPod.
• Depending on the type of iPod and the software version, some
functions may not operate.
• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iPod when using this unit in
conjunction with the iPod.
Viewing videos on an iPod
®
in the Browse
mode
When an iPod equipped with a video function is connected to a
DENON ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W control
dock for iPod, image files can be played in the Browse mode.
1
Use ui to select “Videos”, then
press ENTER or p.
2
Use ui to select the search item
or folder, then press ENTER or p.
3
Use ui to select the video le, then press ENTER,
p or 1.
Playback starts.