EasyManuals Logo

Denon AVR-1611 User Manual

Denon AVR-1611
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
26
ENGLISH
DENON original surround playback
1
Playing the source (vpage 20
23).
2
Press SIMULATION to select the
surround mode.
Each time SIMULATION is pressed, the
surround mode is switched.
MULTI CH
STEREO
This mode is for enjoying stereo sound from all
speakers.
ROCK ARENA
This mode is for enjoying the atmosphere of a live
concert in an arena.
JAZZ CLUB
This mode is for enjoying the atmosphere of a live
concert in a jazz club.
MONO MOVIE
z
This mode is for playing monaural movie sources
with surround sound.
VIDEO GAME
This mode is suited for achieving surround sound
with video games.
MATRIX
This mode lets you add a spacious feel to stereo
music sources.
VIRTUAL
This mode is for enjoying surround effects using
only the front speakers or headphones.
z When playing sources recorded in monaural in the “MONO
MOVIE” mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD
or DTS Express, you cannot select DENON original surround mode.
Stereo playback
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and subwoofer.
If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
1
Playing the source (vpage 20
23).
2
Press D/ST to select “STEREO”.
Stereo playback begins.
Direct playback
Sound recorded in source is played as is.
Surround back signals or front height signals are not created.
In this mode, the following items cannot be adjusted.
Tone (vpage45) MultEQ
®
(vpage46)
Dynamic EQ
®
(vpage46) Dynamic Volume
®
(vpage47)
RESTORER (vpage48)
1
Playing the source (vpage 20
23).
2
Press D/ST to select “DIRECT”.
Direct playback begins.

Table of Contents

Other manuals for Denon AVR-1611

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1611 and is the answer not in the manual?

Denon AVR-1611 Specifications

General IconGeneral
Impedance6 Ω
Frequency range10 - 100000 Hz
Audio output channels5.1 channels
Audio A/D Converter (ADC)24-bit/96kHz
Signal-to-Noise Ratio (SNR)98 dB
Total Harmonic Distortion (THD)0.7 %
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Radio Data System (RDS)Yes
Audio systemDolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, DTS-HD, DTS 96/24
Output power110 W
Dimensions (WxDxH)434 x 381 x 171 mm
Power requirementsAC 230, 50 Hz
HDMI ports quantity5
I/O ports1 x Component 3 x Composite (Video) 5 x Analogue Audio (Tuner included) 1 x Composite Monitor 1 x Microphone Port 1 x Dock Control Port 1 x FM Tuner Antenna 1 x AM Tuner Antenna
Connectivity technologyWired
Digital audio optical in1
Product colorBlack
Power consumption (standby)0.1 W
Power consumption (typical)360 W
Weight and Dimensions IconWeight and Dimensions
Weight9200 g

Related product manuals