Denver Instrument Summit - Page 33

33
Example:
Calculating the weight per unit area of paper: An A4 sheet of paper is used in
this example, with surface dimensions of 0.210 m + 0.297 m = 0.06237 m
2
. To
determine the weight per unit area, the total weight is divided by the surface.
Parameter settings:
Applic.: Calc..: Method: Div. (menu code 2. 8. 1. 2)
Step Key Display/Data output
(or instruction)
1. Tare the balance
t 0.00 g
2. Activate divisor input
______0.
3. Set the divisor (in this example: 0.06237):
Position the decimal point, ,
5+ ,
__.00000
2+
Enter numerals
Repeatedly
__.06000
or press and hold:
,
, etc.
__.06237
4. Store the divisor and
initialize the balance +
0.0
o
The current divisor remains Div 0.6237
stored in battery-backed memory
until the setting is changed
5. Weight per unit area: +
79.7
o
*
Place an A4 sheet of paper
on the balance
6. If desired, print result
Res + 79.7 o
7. Toggle display between Repeatedly: + 4.97 g
*
weight and calculated value + 79.7
o
*
8. Unload the balance + 0.0
o
*
9. Repeat as needed, starting from
Step 5
SELECT
PRINT
ENTER
ENTER
SELECT
ENTER
SELECT
ENTER
SELECT