30
Weighing in Percent
Display symbol: %
Purpose
This application program allows you
to obtain weight readouts in percent
which are in proportion to a reference
weight.
Preparation
§ Select the Weighing in percent
application in the menu:
see “Configuration.”
§ Set the following parameters:
Applic. Application program
Percent Weighing in percent
Dec.Plcs. Decimal places
None No decimal places
o 1 Dec. Pl. 1 decimal place
2 Dec. Pl. 2 decimal places
3 Dec. Pl. 3 decimal places
o = Factory setting
Changing the Reference Percentage
Activate function:
Press the key
Select the desired reference (1 to
100):
In increments of 1: Press the key
briefly
In increments of 10: Press and hold
the key.
The percentage is stored in battery-
backed memory.
Printout: Weighing in percent
pRef 100 : Reference
percentage
Wxx% 111.6 g : Reference weight
net xx% for
selected reference
percentage
Prc + 94.9 % : Calculated refer-
ence percentage
To Next Page
Loading...
