55
C Marking
The balance complies with the fol-
lowing EC Directives and European
Standards:
Council Directive 89/336/EEC
“Electromagnetic compatibility
(EMC)”
Applicable European Standards:
Limitation of emissions:
In accordance with product standard
EN 61326-1 Class B (residential area)
Defined immunity to interference:
in accordance with product standard
EN 61326-1
(minimum test requirements,
non-continuous operation)
Important Note:
The operator shall be responsible for
any modifications to Denver equip-
ment and must check and, if neces-
sary, correct these modifications.
On request, Denver will provide infor-
mation on the minimum operating
specifications (in accordance with the
Standards listed above for defined
immunity to interference).
73/23/EEC “Electrical equipment
designed for use within certain
voltage limits”
Applicable European Standards:
EN 60950
Safety of information technology
equipment including electrical busi-
ness equipment
EN 61010
Safety requirements for electrical
equipment for measurement, control
and laboratory use Part 1: General
requirements
If you use electrical equipment
in installations and under ambient
conditions requiring higher safety
standards, you must comply with the
provisions as specified in the applica-
ble regulations for installation in your
country.
To Next Page
Loading...
