Printout for Density Determination
Wa + 20.0 g : Weight in air
Wfl + 15.0 g : Weight in liquid
Rho 4.0 o : Result: density
of the sample
40
Density Determination
Display symbol: W
Purpose
This application program lets you
determine the density of solid sub-
stances using the buoyancy method.
You can have results displayed with
one decimal place, or no decimal
places: see “Configuration.”
Note: the sample holder and suspen-
sion wire used in the example below
are not included with the balance.
Preparation
§ Select the Density Determination
application in the menu:
see “Configuration.”
§ Set the following parameters:
Applic. Application program
density Density determination
dec.plcs. Decimal places
none No decimal places
o 1dec.pl. 1 decimal place
o = Factory setting
To Next Page
Loading...
