Desoutter CONNECT Series User Manual

Printed Matter No. 6159924300_EN
Issue No. 05
Date 03/2020
Page 1 / 84
CONNECT Industrial Smart Hub
Product Instructions
Model Part number
CONNECT-X 6159327220
CONNECT-W 6159327230
Download the latest version of this document at
http://www.desouttertools.com/info/6159924300_EN
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference

Desoutter CONNECT Series Specifications

General

Brand	Desoutter
Model	CONNECT Series
Category	Switch
Language	English

Summary

Product Instructions

Product Information

Network and WI-FI settings

WI-FI settings

Installation

Installation Requirements

Prerequisites for installation, including line voltage and distances.

Installation Instructions

Step-by-step guide on how to install the CONNECT hub.

How to set up networks

How to select the network configuration

Guide to configuring network settings based on model and interface needs.

Pairing tools via RFID

Pairing tools via eDOCK

Instructions for pairing tools using the eDOCK accessory.

Initial Configuration

Name, torque unit, speed unit, keypad beep, sleep mode

Setting date, time and synchronization

Operation

How to create a tightening unit

Detailed process for creating a new tightening unit for tools.

How to associate a tool to a tightening unit

Steps to link a specific tool to a configured tightening unit.

How to set up a simple Pset

Guide to creating a basic Pset for tightening operations.

Executing the Pset

How to run a configured Pset using the tool.

How to set up a simple Assembly Process

Executing the Assembly Process

How to run an Assembly Process using the connected tool.

Sending results to CVINET WEB database

How to display and read results

Service

About features

Information regarding features available for the CONNECT system.

How to save and back up data

Procedures for saving and backing up system data.

Reset to factory

Restoring the CONNECT system to its original factory settings.

How to manage UV counters

Tool maintenance

Getting information about tools

Monitoring the tool calibration status

Monitoring the tool counters

Monitoring the tool temperature

Upgrading system and tool firmware

Upgrading firmware

Troubleshooting

What if the tightening unit is not active

Diagnosing and resolving issues with inactive tightening units.

Tool connection lost

Troubleshooting steps when a tool loses its connection to the system.

What information to send to Desoutter support