Desoutter CVI3 Vision Configuration Manual

- 14 - 6159924940 - 07/2020
How to run a Pset with CVI3 Vision or TWINCVI3
Setting the running mode to Pset
Go to the start screen.
Tap this icon to go to the main menu.
Tap Configuration > Tightening unit.
Select the tightening unit which manages the tool.
Press this button to edit the tightening unit.
Go to Running mode and select Pset.
Press this button to validate.
Tap this icon to save.
Selecting which source will start the Pset
Go to the start screen.
Tap this icon to go to the main menu.
Tap Configuration > Tightening unit.
Press this button to edit the tightening unit.
Go to Pset source and select Front panel.
Press this button to validate.
Tap this icon to save.
Creating a Pset
The tool must be connected.
Keep the cordless tool awake by pressing the trigger, the run reverse button or the OK button.
Tap this icon to go to the main menu.
Go to Configuration > Pset.

Desoutter CVI3 Vision Specifications

General

Brand	Desoutter
Model	CVI3 Vision
Category	Controller
Language	English