0044-0391-0M Rev F y solo Series Owner’s Manual
13
BATTERY OPERATION, CONT.
Low Battery
When the batteries are near the point they need to be replaced, /62; will be shown on the
display. If the battery voltage drops too low for accurate weighing, the scale will shut off and
you will be unable to turn it back on. When the /62; message is displayed, the operator
should replace the batteries, or remove the batteries and plug in the 9V AC/DC adapter.
Automatic Shutoff
The Automatic Shutoff feature will turn the scale off after a period of inactivity (no motion
or weight on the scale) to prolong battery life. The period of inactivity for the automatic
shutoff is selected during the setup process of the scale and can be set for up to nine (9)
minutes. To turn the scale back on, you simply press the key.
To Next Page
Loading...
Need help?
General
