0044-0391-0M Rev F y solo Series Owner’s Manual
20
OPERATION, CONT.
Height and/or BMI Measure Mode
(using solo Height Rod or Previously Measured Height)
1. Assist the patient on to the scale.
2. The display will show the patient’s weight.
3. Read and record the weight displayed.
4. Press the key to enter the Height mode.
5. The scale display will show '." if units is pounds or .
cm if units is kilograms.
6. Press the © or ª keys to increment or decrement to the correct height.
7. Press the key. The display will change to show the BMI (Body Mass Index).
8. Read and record the patient’s BMI.
9. Press the key once more and the display will return to the patient’s weight.
NOTE: While the patient is still standing on the scale, pressing the key will toggle
between the BMI and weight display.
10. Assist the patient off the scale.
11. Once the patient steps off the scale, the display will return to the weight only mode.
12. To turn the scale off, press the key.
NOTE: If the Automatic Shutdown feature has been enabled, the scale will turn off after a
pre-defined time of inactivity (no motion or weight on the scale).
Optional BMI Mode
1. Press the key.
2. The scale will show . on display.
3. Press the key. The display will go blank, and the BMI annunciator will turn on.
4. Assist the patient on to the scale. The patient’s weight will be displayed.
5. When weight is stable and locked, the scale automatically changes to the Height mode.
6. The scale display will show '." if units is pounds or .
cm if units is kilograms.
7. Press the © or ª keys to increment or decrement to the correct height.
8. Press the key. The display will change to show the BMI (Body Mass Index).
9. Read and record the patient’s BMI.
10. Press the key once more and the display will return to the patient’s weight.
NOTE: While the patient is still standing on the scale, pressing the
key will toggle
between the BMI and weight display.
11. Assist the patient off the scale
12. Once the patient steps off the scale, the display will return to the weight only mode.
13. To turn the scale off, press the key.
NOTE: If the Automatic Shutdown feature has been enabled, the scale will turn off after a
pre-defined time of inactivity (no motion or weight on the scale).
To Next Page
Loading...
Need help?
General
