0044-0391-0M Rev F y solo Series Owner’s Manual
17
ANNUNCIATORS
The annunciators are turned on to indicate that the scale display is in the mode
corresponding to the annunciator label or that the status indicated by the label is active.
ZERO
This annunciator is turned on to indicate the weight displayed is within +/- 1/4
division of the center of zero.
LOCK
This annunciator is turned on to show that the scale is locked onto the
displayed weight.
STA This annunciator is turned on when the weight on the scale is stable.
HOLD
This annunciator is turned on to show that the display is locked onto the last
stable weight.
lb This annunciator is turned on to indicate the displayed weight is in pounds.
kg This annunciator is turned on to indicate the displayed weight is in kilograms.
cm
This annunciator is turned on when the displayed height measurement is in
centimeters.
' "
These annunciators are turned on when the displayed height measurement is
in feet and inches.
HEIGHT
This annunciator is turned on when the scale is in the height measurement
mode.
WEIGHT This annunciator is turned on when the scale is in the weight only mode.
BMI
This annunciator is turned on when displaying the calculated Body Mass
Index.
This annunciator is turned on when the scale is in the Mother/Baby Weighing
mode.
To Next Page
Loading...
Need help?
General
