Before Making Copies
5
D 1650iD/D 2050iD 5-15
7 Using the and
keys, select the size of the
paper loaded.
H If “OHP” was selected in
step 5, select from the
following four paper size
settings.
“A4 L”
“A4 C”
“Letter L”
“Letter C”
H If paper with a non-
standard size is loaded,
press the key
(“CUSTOM”), and then
use the 10-Key Pad to
enter the paper size. (For
details, refer to “Copying
Onto Various Types of
Media” on page 4-1.)
?
Do you know the size of
FLS paper?
§ The default FLS size is 210 mm × 330 mm. To change the FLS
size, contact your service representative.
8 Press the [Yes] key.
The main screen appears.
9 If necessary, specify any other copy settings.
H Zoom (p. 5-22)
H Copy density (p. 5-26)
H Advanced Copy Operations (p. 6-1)
10 Press the [Start] key.
Tip
If paper other than plain paper is specified and the Multiple Bypass is
used, the screen changes as shown below.
To Next Page
Loading...