Develop D 1650iD - To Make Copies after Specifying a Copy Density; Interrupting Copy Jobs [CD]

Before Making Copies
5
D 1650iD/D 2050iD 5-27
To make copies after specifying a copy density
1 Load the document to be copied.
H Refer to “Loading the Document” on page 3-8.
2 Press the [Auto/Photo] key to select
between the “TEXT/P[A]” (AUTO),
“TEXT[A]” (AUTO), “PHOTO”,
“TEXT/P”, or “TEXT” settings.
H The current setting appears on
the left side of the screen.
3 If the “PHOTO”, “TEXT” or “TEXT/
P” setting was selected, use the
and keys to adjust the
density level.
4 If necessary, specify any other copy
settings.
H Paper (p. 5-17)
H Zoom (p. 5-22)
H Advanced Copy Operations
(p. 6-1)
5 Using the 10-Key Pad, enter the
desired number of copies, and then
press the [Start] key.
5.9 Interrupting Copy Jobs [CD]
For further information, see “5 Before Making Copies” in the extended
manual on the CD-R.
When making copies with a
light density level
When making copies with a
darker density level