Completion Certificate
The following is an example of a typical “Completion or Contract Takeover Certificate” that should
be obtained from the client indicating his approval and acceptance that the installation has been
successfully completed in accordance with the contract specification and documentation.
Job No.: Customer's Name:
Signed: Date:
Name: Position:
(For and on behalf of Dexion Limited)
Signed: Date:
Name: Position:
For and on behalf of:
(Customer's authorised representative - signing does not affect your statutory rights)
Slotted Angle Rolled Edge Shelf SelectaFlo Twin Track Roller
Speedlock P90
Deepstor
Full Width Roller Conveyors - Mech
Impex Spandex Shelving Push Back Rack Conveyors - PLC
Clearspan 2 Stordex Protex Conveyors - Softw
Mobile S 90 Shelving
Tel: Fax:
REASON(S) FOR NON-ACCEPTANCE OF CONTRACT TAKEOVER CERTIFICATE
DEXION NON-ACCEPTANCE CONTACT & DATE
PRODUCT CHECKLIST(S) AS PER ATTACHED
We certify that the above Contract has been completed in accordance with the requirements of the specification,
subject to any exceptions detailed below, and we confirm that the installation was taken over by us on this date.
EXCEPTIONS (WHERE APPROPRIATE)
CERTIFICATION
Date: Area Site Manager:
INSTALLATION DESCRIPTION
Contract Takeover Certificate
DEXION LIMITED
Contractor:
Address:
Originator:
Issue: June 2005 Section B – Construction Guidelines Page B.4
To Next Page
Loading...