FULLY SOLID CLAD FRAMES.
‘H’ = Frame height, ‘N’ = required number of cladding sheets.
Each cladding sheet must be secured with either swage or rivet connections, positioned at the top,
the bottom and the rest evenly distributed in between at no more than 400mm centres.
For a 900mm sheet use 6 connections, 1000mm = 8, 1600mm = 10, 2100mm = 12, 2300mm = 14,
and 2500mm = 14 connections. Half to each upright.
A chart detailing the recommended cladding sheet combinations for each frame height is shown on
the following pages.
Issue: June 2005 Section E – Frame Assembly Schedule Page E.36
To Next Page
Loading...