DFI EL620-C - Page 33

33
2
Hardware Installation
Connecting External Serial Ports
YourCOM portmaycomemountedonacard-edgebracket.Installthecard-edge
bracket to an availableslot at the rear of the system chassis then insert the se-
rial port cable to a COM connector. Make sure the colored stripe on the ribbon
cableisalignedwithpin1oftheCOMconnector.
BIOS Setting
Congure the serial ports in the Integrated Peripherals submenu (“Super IO De-
vice”section)oftheBIOS.Refertochapter3formoreinformation.