The Main Menu
You can make the following selections on the Main Menu itself. Use the sub menus for other
selections.
6.5. Error messages
The analyzer checks the operations of several mechanic, fluidic and electronic parts during
measurement. The system shows the type of the error on the LCD display if any kind of
malfunction is detected.
The electronic parts have a very little chance to fail, only the connections and cables could
disconnect, which can cause the malfunction of the electronic system. The mechanic and fluidic
system have a bit more chance to go wrong because it has moving parts.
In 6.7.1 section there is the total error code list.
To Next Page
Loading...