Dick SM-200 TE - Page 15

SM-200 TE Grinding and Honing Machine 15
Safety
5
WEAR SUITABLE PROTECTIVE CLOTHING
Rotating machine parts can catch unsuitable clothing or long hair.
Abrasive particles spun off the machine or loud machine noises
can damage eyes and ears.
Sharp and hot workpieces can cause injuries to hands.
Rotating abrasives can pull off pieces of clothing.
• Wear safety glasses or goggles,
• Gehörschutz tragen,
• Wear suitable protective gloves,
• Ensure good lighting is available,
• Wear tight-fitting clothing,
• Do not wear jewellery,
• Wear a hair net on long hair,
• Do not touch rotating machine parts with parts of the body
covered with fabric.
Further information on the safe operation of the SM-200 TE
grinding and honing machine:
• Keep the work area clean. An untidy work area increases the
risk of accidents.
• Do not leave any tool keys in place. Check that all keys and
adjustment tools are removed each time before switching on
the machine.
• Switch off the SM-200 TE grinding and honing machine and
pull the mains plug out of the socket before the machine is
ever transported.