Dickey-John PM300E - Minimum;Average;Maximum Spacing; Spacing Row Scan; Seeds Per Distance; Minimum;Average;Maximum Seeds Per Distance

OPERATOR’S MANUAL
PM300E and PM332E Planter Monitors
11001-1423-200710
32 / OPERATE MODE
MINIMUM/AVERAGE/MAXIMUM SPACING
Minimum/Average/Maximum Spacing alternates the display of the
minimum row, planter average, and maximum row every two seconds.
When a minimum or maximum row is displayed, the corresponding symbol
is shown with the row number.
SPACING ROW SCAN
Spacing Row Scan displays the spacing of each of the planter's rows. The
displayed row is incremented every two seconds. After the last row is
displayed, the scan will resequence beginning with the first active row.
SEEDS PER DISTANCE
Average Seeds Per Distance displays the average seeds per meter (s/m)
or seeds per foot (s/ft) of the planter's rows that are configured for
population. This function may be labeled with a symbol or text, depending
on the text/graphic setting.
MINIMUM/AVERAGE/MAXIMUM SEEDS PER DISTANCE
Minimum/Average/Maximum Seeds Per Distance alternates the display
of the minimum row, planter average, and maximum row every two
seconds. When a minimum or maximum row is being displayed, the
corresponding symbol is shown with the row number.
SEEDS PER DISTANCE ROW SCAN
Seeds Per Distance Row Scan displays the seeds per distance of each of
the planter's rows. The displayed row is incremented every two seconds.
After the last row is displayed, the scan will resequence beginning with the
first active row.
FIELD AREA 1
Field Area 1 (ac1/ha1) displays the area of Field 1 in hectares (ha) acres
(ac) depending on the Metric/English setting. This function can be labeled
with a symbol or text, depending on the text/graphic setting.
FIELD AREA 2
Field Area 2 (ha2/ac2) displays the area of Field 2 in hectares (ha) or
acres (ac) depending on the Metric/English setting. This function can be
labeled with a symbol or text, depending on the text/graphic setting.
TOTAL AREA
Total Area (ha3/ac3) displays the total field area in hectares (ha) or acres
(ac) depending on the Metric/English setting. This function can be labeled
with a symbol or text, depending on the text/graphic setting.
...
...
1
2