Dickey-John PM300E - All Rows Failure

OPERATOR’S MANUAL
PM300E and PM332E Planter Monitors
11001-1423-200710
36 / ALARMS
Figure 25
Row Failure Display
ALL ROWS FAILURE
An All Row Failure alarm is a unique alarm identifier (8 chirps) that
differentiates from all other alarms and triggers when no seed flow is
detected from any row unit when ground speed is detected.
Typical scenarios to activate an All Row Failure alarm:
1. Tractor is stopped while planter is in the ground.
2. Tractor is operating with planter lifted.
3. Normal “end of run” turn around.
Figure 26
All Rows Failure Display
1 3 5 7
Row Failure