To Next Page

To Previous Page

Module specifications Network interface

ConnectCore for i.MX51 Hardware Reference Manual

129

Ethernet 2

Standard: IEEE 802.3/802.3u

Physical layer: 10/100Base

Data rate: 10/100 Mb/s

Mode: Full or half duplex

WLAN

Standard

n IEEE 802.11a/b/g/e/i/h/j standards

n Single-stream IEEE 802.11n

Frequency band

n 2.400 - 2.500 GHz (Low Band)

n 4.900 - 5.850 GHz (High Band)

Data rates

n 802.11n :6.5, 13, 19.5, 26, 39,52, 58.5, 65 Mb/s

n 802.11a/g :6, 9, 12, 18, 24, 36, 48, 54 Mb/s

n 802.11b :1, 2, 5.5, 11 Mb/s

Media access control

n Dynamic selection of fragment threshold, data rate and antenna depending on the channel

statistics

n WPA, WPA2 and WMM support

Wireless medium

n 802.11b/g: Direct Sequence-Spread Spectrum (DSSS) and Orthogonal Frequency Divisional

Multiplexing (OFDM)

n 802.11a/n: OFDM

DFS client

n This module supports the DFS Client only between 5.25 - 5.35 GHz and 5.50 - 5.70 GHz bands. It

does not support being DFS Master, or can it be connected to an Ad hoc network in these

Digi ConnectCore Hardware Reference Manual

Other manuals for Digi ConnectCore