About the development board LEDs
ConnectCore for i.MX51 Hardware Reference Manual
73
LEDs
WLAN, LE12
LED indicating WLAN operational status.
Power LEDs, LE3, LE4, LE6 and LE7
All power LEDs are red. The power supplies must be present:
n LE3 ON indicates that +9VDC / +30VDC power is present
n LE4 ON indicates that battery power is present
n LE6 ON indicates that +5VDC power for the development board is present
n LE7 ON indicates that +3.3VDC power for the development board is present
To Next Page
Loading...
