M o d e l S M - 5 3 0 0 U s e r M a n u a l | 98
––––––––––––––––––––––––––––––––––
4.1 Thermal Head Cleaning
Product Maintenance
4.1 Thermal Head Cleaning
To maintain good quality print-outs and long life span for the thermal print head, regular cleaning
of the thermal print head is required. Please use the cleaning kit supplied with the product.
Instruction
(1) Turn OFF Scale by Main Power Switch.
(2) Open the printer door by pulling the printer latch outward horizontally.
(3) Swing open the printer door in a clockwise direction.
(4) Pull out the cassette horizontally
(5) Use the tip of the cleaning pen to clean the thermal head portion (Black part) as shown in
Fig. 1:
Use only the cleaning pen from the provided cleaning kit.
Do not clean or try to remove dirt or anything sticking on thermal head.
With sharp objects-this will DAMAGE the thermal print head.
There is a cutter at the printer door near the dispenser.
Take care not to touch or cut your fingers against the cutter.
(6) After cleaning, push back the cassette into the main unit until a lock sound is heard.
(7) Close the printer door by pushing at the lower area of the printer door until a lock sound is
heard.
(8) Refer to diagram below:
All manuals and user guides at all-guides.com
To Next Page
Loading...
Need help?
General
