Digi SM-5300 - Touch Screen Calibration

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 94
Report Mode
–––––––––––––––––––––––––––––––––––––––––––––––––
3.2 Entry to Report Mode
3.2.18 Void Label Report
Void Label Report is used to view/print Label data separated by Void Label. On Void Label Report,
Sales transaction report is printed depending on the date range selection.
Example: Printing report for Void Report (TODAY).
OPERATION
DISPLAY
1.
In REPORT GENERATOR screen.
Touch [VOID LABEL REPORT] key to go
to VOID REPORT MODE screen.
2.
Set the printing order by touching the boxes
and select the desired data or by using the
numeric key to enter in number.
For example:
- DATE RANGE: 18-12-15 to 18-12-
15
Note: Also can select by pressing
[TODAY] or [LAST 7 DAYS]
button
- PLU RANGE: 1 to 999999
3.
Touch [PREVIEW] key to view the report.
Note:
1. Touch [UP] or [DOWN] key, to view
continues of report.
2. Touch [EXIT] key to exit view PLU Total
Report.
3. Touch [ZOOM IN] or [ZOOM OUT] key
to zoom in or zoom out preview report.
All manuals and user guides at all-guides.com