DigiDesign Mbox 2 Mini User Manual

Mbox 2 Mini Setup Guide
34
Pro Tools Hardware Settings
In the Hardware Settings dialog, Pro Tools lets you set the default sample rate and clock source
for your system, as well as a range of controls specific to each type of audio interface.
Default Sample Rate
The Sample Rate setting appears as the default sample rate when you create a new session.
(This setting is available in the Hardware Setup dialog only when no session is open.)
To change the default Sample Rate:
1 Choose Setup > Hardware.
2 Select the sample rate from the Sample Rate pop-up menu.
3 Click OK.
You can change the sample rate when creating a new Pro Tools session by selecting a different
sample rate in the New Session dialog. (See the Pro Tools Reference Guide for details.)
Hardware Setup dialog for Mbox 2 Mini

DigiDesign Mbox 2 Mini Specifications

General

Brand	DigiDesign
Model	Mbox 2 Mini
Category	Recording Equipment
Language	English