Digisol DG-BG4100NU - Page 39

DG-BG4100NU User Manual
39
 If selected Fixed IP, y ou should enter the local IP address,
remote IP address and subnet mask.
 If selected DHCP, the router is a DHCP client, the WAN IP
address is assigned by the remote DHCP serv er.
Local IP Address
Enter the IP address of WAN interface provided by y our ISP.
Remote IP Address
Enter the remote IP address.
Net mask
Enter the subnet mask of the local IP address.
Unnumbered
Select this checkbox to enable IP unnumbered function.
Def ault Route
Enable/Disable the default route.
Add
After conf iguring the parameters of this page, click it to add a
new PVC into the Current ATM VC Table.
Modif y
Select PVC in the Current ATM VC Table, then modify the
parameters of this PVC. After finishing, click it to apply the
settings of this PVC.
Delete
Select PVC in the Current ATM VC Table, then delete the PVC.
Reset
Click reset to undo the settings entered in this page and retain
them to def ault settings.
Current ATM VC Table
This table shows the existing PVCs. It shows the interface
name, channel mode, VPI/VCI, encapsulation mode, local IP
address, remote IP address and other information. The
maximum item of this table is eight.