DG-BG4100NU User Manual
63
to the device.
In Shared key, the wireless client connects to the router
using the shared key.
The default is set to Auto, which allows either Open System
or Shared Key authentication to be used.
This value should remain at its default setting of 2346. It
specif ies the maximum size for a packet before data is
fragmented into multiple packets. If you experience a high
packet error rate, y ou may slightly increase the ―Fragment
Threshold‖ v alue within the value range of 256 to 2346. Setting
this v alue too low may result in poor network perf ormance. Only
minor modif ications of this value are recommended.
This v alue should remain at its def ault setting of 2347. If you
encounter inconsistent data flow, only minor modifications are
recommended. If a network packet is smaller than the preset
―RTS threshold‖ size, the RTS/CTS mechanism will not be
enabled.
The Beacon Interval v alue indicates the f requency interv al of the
beacon. Enter a value between 20 and 1024.
Data beacon proportion (transmission quantity indication). Its
value range is 1-255 and the def ault value is 100.
Choose the transmission rate of the wireless data.
You can choose Auto, 1 M, 2 M, 5.5 M, 11 M, 6 M, 9 M, 12 M, 18
M, 24 M, 36 M, 48 M, 54M, MSC0 ~ MSC15.
Long Preamble: It means this card always uses long
preamble.
Short Preamble: It means this card can support short
preamble capability.
Select whether the router broadcasts SSID or not. You can
select Enable or Disable.
Select Enable, the wireless client searches the router
through broadcasting SSID.
Select Disable to hide SSID, the wireless clients cannot f ind
To Next Page
Loading...
