Digisol DG-BG4100NU - Page 97

DG-BG4100NU User Manual
97
Automatically
from one of the PPPoA, PPPoE or 1483 Routed enabled PVC(s)
during the connection establishment.
Set DNS
Manually
Select it, enter the IP addresses and choose the WAN interf ace of
the primary, the secondary and the tertiary DNS serv er.
Apply Changes
Click it to sav e the settings of this page.
Reset Selected
Click it to start configuring the parameters in this page.
DDNS
Click DDNS in the left pane, and the page shown in the f ollowing f igure appears. This page is
used to configure the dy namic DNS address from Dy nDNS.org or TZO. You can add or
remov e to configure dy namic DNS.