DG-BG4300NU User
Manual
34
After the settings are done, click Next, the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field Description
Obtain an IP address
automatically
Select it, DHCP automatically assigns the IP
address for WAN connection.
Use the following IP address
Select it, you need to manually enter the IP
address, subnet mask and default gateway for
WAN connection, which are provided by your ISP.
Obtain DNS server
addresses automatically
Select it, DHCP automatically assigns DNS server
address.
Use the following DNS server
addresses
Select it, you need to manually enter the primary
DNS server address and secondary DNS server
address.
Enable NAT Select it to enable network address translation
To Next Page
Loading...
Need help?
General
