DG-BG4300NU User
Manual
51
The following table describes the parameters of this page:
Field Description
DHCP Mode
If set to DHCP Server, the router can assign IP addresses, IP default
gateway and DNS Servers to the host in Windows95, Windows NT
and other operation systems that support the DHCP client.
IP Pool Range
It specifies the first and the last IP address in the IP address pool. The
router assigns IP address that is in the IP pool range to the host.
Show Client
Click it, the Active DHCP Client Table appears. It shows IP addresses
assigned to clients.
Subnet Mask Enter the subnet mask here.
Default Gateway Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host retains the
assigned IP addresses before the IP addresses change.
Domain Name
Enter the domain name if you know. If you leave this blank, the
domain name obtained by DHCP from the ISP is used. You must enter
host name (system name) on each individual PC. The domain name
can be assigned from the router through the DHCP server.
DNS Servers You can configure the DNS server ip addresses for DNS Relay.
Set VendorClass
IP Range
Click it, the Device IP Range Table appears. You can configure the IP
address range based on the device type.
To Next Page
Loading...
Need help?
General
