DG-BG4300NU User
Manual
52
Click Show Client in the DHCP Mode page, the page shown in the following figure appears.
You can view the IP address assigned to each DHCP client.
The following table describes the parameters and buttons in this page:
Field
Description
IP Address
It displays the IP address assigned to the DHCP client from
the router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address. The MAC
address is assigned at the factory and it consists of six pairs
of hexadecimal character, for example, 00-17-7C-00-02-12.
Expiry (s)
It displays the lease time. The lease time determines the
period that the host retains the assigned IP addresses
before the IP addresses change.
Type
Automatic, means if the IP / MAC of the client are not binded
using the Static DHCP option. Manual, means the IP/MAC
are binded using the Static DHCP Option.
Refresh Click it to refresh this page.
Close Click it to close this page.
To Next Page
Loading...
Need help?
General
