DG-BG4300NU User
Manual
58
remote IP address and subnet mask.
•
If select DHCP, the router is a DHCP client, the WAN IP
address is assigned by the remote DHCP server.
Local IP Address Enter the IP address of WAN interface provided by your ISP.
Netmask Enter the subnet mask of the local IP address.
Unnumbered Select this checkbox to enable IP unnumbered function.
Add
After configuring the parameters of this page, click it to add a
new PVC into the Current ATM VC Table.
Modify
Select PVC in the Current ATM VC Table, then modify the
parameters of this PVC. After finishing, click it to apply the
settings of this PVC.
Delete Select PVC in the Current ATM VC Table, then delete the PVC.
Reset
Click reset to undo the settings entered in this page and retain
them to default settings.
Current ATM VC Table
This table shows the existing PVCs. It shows the interface
name, channel mode, VPI/VCI, encapsulation mode, local IP
address, remote IP address and other information. The
maximum item of this table is eight.
To Next Page
Loading...
Need help?
General
