DG-BG4300NU User
Manual
60
timeout time. Within the preset minutes, if the router does not
detect the flow of the user continuously, the router automatically
disconnects the PPPoE connection.
Bridge You can select Bridged Ethernet, Bridged PPPoE, or Disable
Bridge.
AC-Name The accessed equipment type.
Service-Name The service name.
802.1q You can select Disable or Enable. After you enable it, you need
to enter the VLAN ID. The value ranges from 1 to 4095.
MTU (576-1492)
Maximum transfer unit is the Optimal MTU configuration for
PPPoE ADSL Connections, which is set by ISP.
Apply Changes Click it to save the settings of this page temporarily.
Return Click it to return to the Channel Configuration page.
Reset Click it to refresh this page to the original settings.
Source Mac address The MAC address you want to clone.
MAC Clone Click it to enable the MAC Clone function with the MAC address
that is configured.
To Next Page
Loading...
Need help?
General
