– 131 –
B TROUBLESHOOTING
PROBLEMS ACCESSING THE MANAGEMENT INTERFACE
Table 11: Troubleshooting Chart
Symptom Action
Cannot connect using a
web browser or SNMP
software
◆ Be sure the switch is powered up.
◆ Check network cabling between the management station and
the switch.
◆ Check that you have a valid network connection to the switch
and that the port you are using has not been disabled.
◆ Be sure you have configured the VLAN interface through
which the management station is connected with a valid IP
address, subnet mask and default gateway.
◆ Be sure the management station has an IP address in the
same subnet as the switch’s IP interface to which it is
connected.
Forgot or lost the
password
◆ Contact your local distributor.
To Next Page
Loading...
Need help?
General
