EasyManuals Logo

Digisol DG-GS1526 User Manual

Digisol DG-GS1526
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
C
HAPTER
7
| Creating VLANs
Configuring VLAN Attributes for Port Members
– 60 –
CONFIGURING VLAN ATTRIBUTES FOR PORT MEMBERS
You can configure VLAN attributes for specific interfaces, including the
default Port VLAN identifier (PVID).
PARAMETERS
The following parameters are displayed on the VLAN Setting page:
Port - Selects one or more ports or trunks to configure. Hold down the
Ctrl key and click port numbers to selelct multiple ports. Hold down the
Shift key to select a range of ports.
PVID - The VLAN ID assigned to untagged frames received on the
interface. (Range: 1-4095; Default: 1)
Ports must be a member of the same VLAN as the Port VLAN ID.
WEB INTERFACE
To configure attributes for VLAN port members:
1. Click Configuration, VLAN, VLAN Setting.
2. Select one or more ports or trunks to configure.
3. Configure the required PVID setting.
4. Click Apply.
Figure 16: VLAN Port Configuration

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digisol DG-GS1526 and is the answer not in the manual?

Digisol DG-GS1526 Specifications

General IconGeneral
BrandDigisol
ModelDG-GS1526
CategorySwitch
LanguageEnglish

Related product manuals