4-4-3 Backup/Restore
Save your configurations in a file on your computer so that it may be accessed again
later if your current settings are changed. Be sure to save the configuration before
performing a firmware update.
Choose menu “Maintenance→Backup/Restore”, below given screen will be
displayed.
Here is the description of every setup item:
Press ‘Save’ button, and you’ll be prompted to download the
configuration as a file, default filename is ‘config.img’, you can
save it as another filename for different versions, and keep it in a
safe place.
Load Settings
From
Press ‘Browse…’ to pick a previously-
saved configuration file
from your computer, and then click ‘Upload’ to transfer the
configuration file to the router. After the configuration is
uploaded, the router’s configuration will be replaced by the file
you just uploaded.
To Next Page
Loading...
