4-4-8 Diagnostics-Traceroute
This page is used to traceroute diagnostic. Diagnostic traceroute can check if network
is reachable or not, and find the route path between user and the host under check.
Choose menu “Maintenance→Diagnostics Traceroute”, below given screen will be
displayed.
Here is the description of every setup item:
Parameter Description
Host
Type the destination IP address.
Numberoftries
Type the number of tries.
Timeout Set the waiting time for the reply of each packet. If there is no
reply in the specified time, the connection is overtime.
Datasize
The size of packet.
DSCP
Configure the DSCP parameters.
MaxHopCount
The max number of hops for a traceroute connection.
Interface
By selecting the Interface type.
To Next Page
Loading...
