Digistar SCALE LINK SL2 - Menu 7.1 - Scale Specific Settings (Scales a & B - Jump List 71)

D4204-EN Scale Link 2 Technical Manual 55
SAVTAR (D.A.N. 7267) SAVE TARE
ON = Indicator will save tare weight to non-volatile memory.
WT COM (D.A.N. 7268) WEIGHT COMPENSATION
Enables weight compensation functionality for scale platform A
AD FLT (D.A.N. 7269) AD FFT FILTERING
Enables A/D FFT filtering for scale platform A
CAL100 (D.A.N. 7271) FRACTIONAL WEIGHT CALIBRATION
Enables use of fractional CAL numbers for scale platform A
GAIN (D.A.N. 7272) GAIN
Select gain setting to be used for scale platform. (.75mv/v, 1.5mv/v, 3mv/v)
MENU 7.1 – SCALE SPECIFIC SETTINGS (SCALES A & B - JUMP LIST 71)
NOTE: Scale specific settings can be affected by the same global settings shown. When changed they will affect the currently selected scale.
Global Setting
SCALE PLATFORM A
SCALE PLATFORM B
Scale ID Number
See SCALID (D.A.N. 1003)
SCALID (D.A.N. 7101)
SCALID (D.A.N. 7151)
Weigh Method
See W MTHD (D.A.N. 1002)
W MTHD (D.A.N. 7102)
W MTHD (D.A.N. 7152)
Display Unit
See LB-KG (D.A.N. 1008)
LB-KG (D.A.N. 7103)
LB-KG (D.A.N. 7153)
Capacity
See CAP (D.A.N. 3002)
CAP (D.A.N. 7104)
CAP (D.A.N. 7154)
WM1 Adjust 1
See WMA1-1 (D.A.N. 3003)
WMA1-1 (D.A.N. 7107)
WMA1-1 (D.A.N. 7157)
WM1 Adjust 2
See WMA1-2 (D.A.N. 3004)
WMA1-2 (D.A.N. 7108)
WMA1-2 (D.A.N. 7158)
WM1 Adjust 3
See WMA1-3 (D.A.N. 3005)
WMA1-3 (D.A.N. 7109)
WMA1-3 (D.A.N. 7159)
WM2 Adjust 1
See WMA2-1 (D.A.N. 3006)
WMA2-1 (D.A.N. 7111)
WMA2-1 (D.A.N. 7151)
WM2 Adjust 2
See WMA2-2 (D.A.N. 3007)
WMA2-2 (D.A.N. 7112)
WMA2-2 (D.A.N. 7152)
WM2 Adjust 3
See WMA2-3 (D.A.N. 3008)
WMA2-3 (D.A.N. 7113)
WMA2-3 (D.A.N. 7153)
Motion
See MOTION (D.A.N. 3101)
MOTION (D.A.N. 7114)
MOTION (D.A.N. 7154)
Motion Weight
See MOT WT (D.A.N. 3102)
MOT WT (D.A.N. 7115)
MOT WT (D.A.N. 7155)
Tare Auto Print
See TAREAP (D.A.N. 2301)
TAREAP (D.A.N. 7116)
TAREAP (D.A.N. 7156)
Save Tare
See SAVTAR (D.A.N. 1102)
SAVTAR (D.A.N. 7117)
SAVTAR (D.A.N. 7157)