Digistar SCALE LINK SL2 - Menu 7.2 - Scale Specific Settings (Scales C & D - Jump List 72); Menu 8.0 - Sign-On & Maintenance Messages

56 Scale Link 2 Technical Manual D4204-EN
MENU 7.2 – SCALE SPECIFIC SETTINGS (SCALES C & D - JUMP LIST 72)
Scale Specific Setting
SCALE PLATFORM C
SCALE PLATFORM D
Scale ID Number
See SCALID (D.A.N. 1003)
SCALID (D.A.N. 7201)
SCALID (D.A.N. 7251)
Weigh Method
See W MTHD (D.A.N. 1002)
W MTHD (D.A.N. 7202)
W MTHD (D.A.N. 7252)
Display Unit
See LB-KG (D.A.N. 1008)
LB-KG (D.A.N. 7203)
LB-KG (D.A.N. 7253)
Capacity
See CAP (D.A.N. 3002)
CAP (D.A.N. 7204)
CAP (D.A.N. 7254)
WM1 Adjust 1
See WMA1-1 (D.A.N. 3003)
WMA1-1 (D.A.N. 7207)
WMA1-1 (D.A.N. 7257)
WM1 Adjust 2
See WMA1-2 (D.A.N. 3004)
WMA1-2 (D.A.N. 7208)
WMA1-2 (D.A.N. 7258)
WM1 Adjust 3
See WMA1-3 (D.A.N. 3005)
WMA1-3 (D.A.N. 7209)
WMA1-3 (D.A.N. 7259)
WM2 Adjust 1
See WMA2-1 (D.A.N. 3006)
WMA2-1 (D.A.N. 7211)
WMA2-1 (D.A.N. 7261)
WM2 Adjust 2
See WMA2-2 (D.A.N. 3007)
WMA2-2 (D.A.N. 7212)
WMA2-2 (D.A.N. 7262)
WM2 Adjust 3
See WMA2-3 (D.A.N. 3008)
WMA2-3 (D.A.N. 7213)
WMA2-3 (D.A.N. 7263)
Motion
See MOTION (D.A.N. 3101)
MOTION (D.A.N. 7214)
MOTION (D.A.N. 7264)
Motion Weight
See MOT WT (D.A.N. 3102)
MOT WT (D.A.N. 7215)
MOT WT (D.A.N. 7265)
Tare Auto Print
See TAREAP (D.A.N. 2301)
TAREAP (D.A.N. 7216)
TAREAP (D.A.N. 7266)
Save Tare
See SAVTAR (D.A.N. 1102)
SAVTAR (D.A.N. 7217)
SAVTAR (D.A.N. 7267)
MENU 8.0 – SIGN-ON & MAINTENANCE MESSAGES
SIGNON (D.A.N. 8001) SIGNON MESSAGE
When enabled, entered SIGNON message will scroll continuously until a key is pressed.
SIGMSG (D.A.N. 8002) SIGNON MESSAGE
Allows the entry of custom message up to 120 characters. The SIGNON message will be displayed after the model
number upon power up. Refer to 10/60/SL2 Application Note #3 for more information.
MANTMG (D.A.N. 8011) MAINTENANCE MESSAGE
Allows entry of a custom message up to 120 characters that is based off the hour meter. The message can be used
to alert the user of maintenance needed on the equipment. User will need to acknowledge message by pressing the
“ON” or “ENTER” key. Message will be displayed on each power cycle and every 4 hours of operation until cleared
by MANCLR (D.A.N. 8013). Refer to 10/60/SL2 Application Note #3 for more information.
MANTTM (D.A.N. 8012) MAINTENANCE MESSAGE TIME
Entry of time for the maintenance message to be triggered.
MANCLR (D.A.N. 8013) MAINTENANCE MESSAGE CLEAR
Clearing of maintenance message time or entry of new time.
MARQUE (D.A.N. 8031) MARQUE ACTIVATION
Displays current time if weight is less than 2% capacity and no motion is detected.