Digital Projection E-Vision Laser 4K Series - Setup Menu

page 62
Digital Projection E-Vision Laser 4K Series
Operating Guide
USING THE PROJECTOR
Rev A June 2017
Setup menu
• Orientation
Choose from Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling and
Auto-front.
• Cooling Condition
Choose from Table, Ceiling, Freetilt and Auto.
• High Altitude
Choose from On, Auto and Quiet.
• Standby Power
Choose from SAVE, ECO and Normal.
• Screen Setting
Choose from 16:10, 16:9 and 4:3.
• ColorMax
Set up user-dened color gamut values.
• Power On/Off Management
Access the submenu to set up automatic projector power on and power off.
• Clock Adjust
Access the submenu to set current date and local time.
• Startup Logo
Set this to On if you want the DP logo to show when the projector is rst switched on.
• Blank Screen
Choose from Logo, Black, Blue and White.
• Auto Source
If this setting is On, the projector will automatically search for an active input source.
Highlight the DOWN arrow at the bottom of the page and press ENTER/OK to navigate
to the second Setup menu page.
Notes
Auto-front automatically detects
the projector’s position and sets the
orientation accordingly.
Screen Setting and Auto Source
are not available with input HDMI 3
or HDMI 4.
Setup
Cooling Condition
High Altitude
Orientation
Screen Setting
Power On/Off Management
Clock Adjust
ColorMax
Standby Power
Blank Screen
Auto Source
Startup Logo
q
Auto
Auto
Auto-front
16:9
u
SAVE
u
On
Off
Logo
u