DSF22 UNIQUE MONITORING TERMINAL
10
INSTALLATION AND SETUP GUIDE
Measured fuel data procession.
As vehicle usage is subjected to different movements, it’s difficult to calculate actual amount of fuel
using usual methods. We recommend to enable our unique data procession algorithm, as result of data
procession you will get correct amount of fuel.
How data procession works?
Data procession algorithm is using several input criteria, such as vehicle position (based on
accelerometer), driving speed and driving angle. Based on these parameters, terminal makes data
procession and averaging as result a correct fuel data will be sent to the monitoring server.
Next two pictures demonstrate a difference between processed fuel data and raw data. First picture
shows a fuel curve without using data procession.
Next picture demonstrate a fuel curve using data procession.
Settings related to fuel data processing.
Enable/Disable data processing (filtering)
Fuel data processing depth (used only if P50=1)
Valid fuel data wait time
To Next Page
Loading...