Digital Systems DSF22 - GPS Actual GPS Data; GSM Actual Data of GSM Network

DSF22 UNIQUE MONITORING TERMINAL
36
INSTALLATION AND SETUP GUIDE
GPS Actual GPS data
Description
This command requests actual GPS data from GPS receiver.
Options
Parameter is read only.
Used values
LAT – Actual Latitude in decimal degrees
LONG – Actual Longitude in decimal degrees
SPEED - Actual speed
FIX – Actual GPS quality (0 and 1 – no position available, 2 – weak position,
3-good position)
SAT – Number of satellites used for navigation
Default value
Comments
Example
To read parameter:
GET GPS
Response from device:
LAT: 54.2345678
LONG: 24.1234567
SPEED: 0 KM/H
FIX: 3
SAT: 9
GSM Actual data of GSM network
Description
This command requests actual GSM network data.
Options
Parameter is read only.
Used values
GSM signal – Actual strength of GSM signal
NETW – Network type (home or roaming)
CODE – Current operator PLMN code
Default value
Comments
Example
To read parameter:
GET GSM
Response from device:
GSM signal: 30
NETW: home
CODE: 24705