Digital Systems DSF22 - Restarts GPS Module; FUEL Measured Fuel Value; TX1 SMS Alert Text 1

DSF22 UNIQUE MONITORING TERMINAL
39
INSTALLATION AND SETUP GUIDE
RSTGPS Restarts GPS module
Description
This command performs full restart of GPS module.
Options
Parameter is write only.
Used values
Default value
Comments
Example
To perform command:
SET RSTGPS
Response from device:
DONE
FUEL Measured fuel value
Description
This command requests actual measurement of fuel level. This value is
result of measurement from ADC (Analog to Digital Converter) module.
Options
Parameter is read only.
Used values
Default value
Comments
If P31=1, actual value represents voltage (mV) in analog input
Example
To read parameter:
GET FUEL
Response from device:
FUEL: 1735
TX1 SMS alert text 1
Description
This command defines SMS alert text sent from terminal to defined phone
numbers in case of fuel theft detection (Tank 1).
Options
Parameter can be read and modified.
Used values
Use Latin characters only!!!
Default value
Tank1 Fuel theft detected!!!
Comments
Max allowed length of text 100 letters
Example
To read parameter:
GET TX1
To set parameter:
SET TX1 Fuel theft was detected!
Response from device:
TX1: Fuel theft was detected!