Digital Systems DSF22 - P31 Fuel Data Source; P32 Fuel Measurement Frequency

DSF22 UNIQUE MONITORING TERMINAL
26
INSTALLATION AND SETUP GUIDE
P31 Fuel data source
Description
This parameter defines a data source used to manage fuel consumption.
Terminal will use selected source to acquire fuel data and send to server.
Options
Parameter can be read and modified.
Used values
0 – Specialized fuel sensor input used to get fuel data
1 – External analog input used to get fuel data
Default value
0
Comments
Example
To read parameter:
GET P31
To set parameter:
SET P31 1
Response from device:
P31: 1
P32 Fuel measurement frequency
Description
This parameter defines a fuel measurement frequency during driving time
(Ignition is switched ON). Each unit equals to 32 milliseconds, if necessary
to calculate exact measurement frequency, use following formula:
Example 1 - To set measurement frequency once per second
1 second = 1000 milliseconds
1000/32 = 32.25 - used value must be 32
Example 2 - To set measurement frequency once per 5 seconds
5 seconds = 5000 milliseconds
5000/32 = 156.25 - used value must be 156
Options
Parameter can be read and modified.
Used values
10-250
Default value
15
Comments
Example
To read parameter:
GET P32
To set parameter:
SET P32 50
Response from device:
P32: 50