Digital Systems DSF22 - Identification Data; ERASE Erase Internal Memory; Position Based on GSM Cells

DSF22 UNIQUE MONITORING TERMINAL
37
INSTALLATION AND SETUP GUIDE
ID Identification data
Description
This command requests Identification data of terminal.
Options
Parameter is read only.
Used values
ID – Terminal model
s/n – Terminal serial number
vx.xx – Firmware version
Default value
Comments
Example
To read parameter:
GET ID
Response from device:
ID: DSF22, s/n: 02109, v1.01
ERASE Erase internal memory
Description
This command performs full erase of internal data memory; all unsent data
will be erased.
Options
Parameter is write only.
Used values
Default value
Comments
Example
To perform command:
SET ERASE
Response from device:
DONE
CELLPOS Position based on GSM cells
Description
This command requests position that is based on GSM cells.
Options
Parameter is read only.
Used values
Default value
Comments
Example
To read parameter:
GET CELLPOS
Response from device:
24.506144,56.851971,2015/02/22,14:20:48