DigiTech DigiGate-700 User Manual

3 - 45DigiGate-700
™
for Windows
®
- User’s Guide
DigiGate-700
for Windows
™ ®
Figure 3-91
Figure 3-92
1. From the Main Menu , Figure 3-46, Page 3-24,
Click on the Report button to open the Report
Menu window. Click on the Misc Reports
tab. Figure 3-91.
2. Click on the Setup Info . button.
NOTE: The Setup Info is a series of reports
that show your system configuration and print
as a batch. It is a good idea to print and store
these reports after your system is set up and
running properly. The information these reports
contain can aid our Service Department in
resolving any problems that may occur at a later
date.
3. This will open the Confirm window with the
prompt Print setup information.
Figure 3-92.
4. Click on the Yes button to print the reports or
on the No button to return to the Report
Menu .
5. Clicking on the Yes button will open the
Windows 95 Print window where you can
select printers, etc.
6. After making printer and page selections, Click
on the OK button to print the reports or on the
Cancel button to return to the Report Menu .
7. Clicking on the OK button will open the
Printing progress window with a progress
bar and prompt to show the status of the print
job. Figure 3-93.
8. Clicking on the Cancel button will stop output
to the printer and return you to the Report
Menu .
Setup Info
Figure 3-93

DigiTech DigiGate-700 Specifications

General

Brand	DigiTech
Model	DigiGate-700
Category	Other
Language	English