DigiTech DigiGate-700

DigiGate-700
for Windows
™ ®
1 - 13Publication TitleDigiGate-700
™
for Windows
®
- User’s Guide
Figure 1-27
Figure 1-26
20. After all user information is entered, the Setup
window, Figure 1-26, starts the actual installa-
tion and shows the progress with the four
thermometers on the screen.
21. If you choose to stop the Installation at any
time, Click on the Cancel button.
22. If you are installing from floppy disks, you will
be asked to change disks several times during
the installation procedure. Figure 1-27. Check
that you are inserting the correct numbered disk
each time and then Click on the OK button. If
you put in the wrong disk, the screen asking you
to change disks will be repeated until you insert
the correct disk or Click on the Cancel button.
Note: See Appendix L for instructions to create
a second