19
（3）Flow control page
Users can enable and disable each port’s send and receive flow control through this page.
Flow control by sending the side of the drop-down on or off to open or close the sending side of
flow control, flow control through the receiving side of the drop-down on or off to open or close
the receiver-side flow control, while on and off also shows the port to send side and receiving-side
flow control is turned on or off.
Flow control page
（4）Broadcast storm control page
This page is used to do the suppression for configure port broadcast packets, multicast packets
and DLF packet.From the Port drop-down bar select to configure ports. Through the on and off key
to open and close the port broadcast suppression, multicast, DLF inhibition and suppression.
Inhibition rate is used to configure the port inhibition speed, range 1-1024000, unit kbits. The
inhibition rate of the same port broadcast suppression, multicast and DLF inhibition is the same.
Broadcast Storm Control Page
To Next Page
Loading...
