39
7. Vendor-specific information, the users typically do not need to modify this field.
8. NAS ports, NAS port type, NAS type of service, these three values do not change in general.
9. Whether to on or off the roaming feature of Radius.
Radius configuration page
（3）802.1x Configuration Page
Users can configure 802.1x related information on this page, including:
1. Whether to activate the 802.1x protocol, when doing authentication and accounting must be
to start 802.1x protocol.
2. Switch is to adopt a common authentication method or the expansion of authentication.
3. Whether to open re-authentication function, the default is not open. When you do
authentication and accounting based on the actual circumstances. Open the re-authentication
feature will make users more reliable when using the authentication and accounting, but it
will slightly increase the network traffic.
4. Setting re-certification time interval, only to re-open the case of authentication to be valid,
the default is 3600 seconds, when you do authentication and accounting based on the actual
situation to set the value, but the value is not too small.
5. Quiet Period Timer, users typically do not need to modify this field.
6. Tx-Period Timer, userstypically do not need to modify this field.
7. Server timeout timer, users typically do not need to modify this field.
8. Supplicant timeout timer, users typically do not need to modify this field.
9. Max Request number, users generally do not need to modify this field.
10. Showing Reauth Max size.
11. Client Version, the client version number.
12. Check Client, whether the certification passed then examine the client's regular flow of
packets.
To Next Page
Loading...
