Dikai DK-D03S - Page 34

OPERATIONAL MANUAL
- 34 - D03S THERMAL TRANSFER OVERPRINTER
Model of printing
signal
Deal with the received signals. “Normal”-Print once when get
a signal; “Equal Distance” – Automatically generate print
signal by setting in “Print at equal distance”
Normal/ Equal
Distance
R-type transverse
offset distance
Horizontal distance between 2 R type prints
Unit：0.1mm
Range:0-200
Compensate
Position
Printer automatically adjust print position according to the
print speed (should be in “Continuous” mode, set “Print
Position” in “Optimization”), positive number means print
position move on running direction, negative number means
the opposite.
Unit：1/30mm
Range:-20~20
Line ID
Modify Line ID in the print file
Can be 2 numbers or
alphabet letters
Print at equal
distance
In continuous mode, output print signal at equal distance
Unit： mm
Range：30-999
Percentage of
Compression
In “Compress” mode, percentage of compression
Percentage
Range：50-120%
Minimum print
speed in
continuous mode
Minimum print speed in continuous mode
Unit：m/min
Range：0-5
Language
Language on touch screen
English/ Chinese, etc
Shift Date
Set date and change time
Eg. 0240: time
changes after 2h40’
Type of Print Head
Width of print head
32mm/ 53mm
Time
Set date and system time
Year/ month/ date/
hour/ minute/
second